The composting controller is designed for the automatic supervision and control of the composting process including the loading, unloading operations and inspection in automatic machines.
It has a PC connection using SW6000 for monitoring and recording all the process data.
General Characteristics
It has 9 programmes with 9 steps each with programmed control over different system variables.
Control of the process temperature.
Control of the process RH.
Alphanumerical display with 2x16 characters.
LED display of the Start/Stop/Pause status.
LED display of the loading/unloading operation.
LED display of the breakdown status.
Detection of open/closed door.
RS485 communication for connecting to SW6000.
Electric
Power supply 230 Vac +/- 20%. (50-60 Hz)
Electric consumption: 5VA.
Maximum load for outputs mA with 500 ohm.
Maximum consumption for outputs 0/2-10 v with 10 mA.
Potential-free relay outputs with cut-off capacity 5A/230Vac in a resistive load.
Ends of stroke inputs at 230 Vac.
Protection against sensor break.
Ambient operating temperature between 0 and 50ºC.
Operating relative humidity between 0 and 80% without condensation. 230 Vac +/-20% 50-60 Hz.
Mechanical
Format 150x505 mm.
Depth 50 mm.
Power card measuring 250mm x 140mm x 40mm.
Front protection IP54.
Polycarbonate front with built-in touchscreen keyboard.
Nous utilisons des cookies et des tiers, pour l'analyse de la navigation des utilisateurs. Si vous continuer à naviguer, considérez que vous acceptez l'utilisation. Vous pouvez modifier les paramètres ou obtenir plus d'informations ici.