C\ Gabiria nº 112-114-146 Pº Ventas
20305 Irún (Guipúzcoa) SPAIN
Tel.: +34 943 633 562 | Fax: +34 943 633 285
E-Mail: conatec@conatec.com
CONATECwww.conatec.com

CONATEC
C\ Gabiria nº 112-114-146
Pº Ventas 20305
Irún (Guipúzcoa) SPAIN
Phone. +34 943...  see telephone
Fax. +34 943...  see fax
E-Mail: conatec@conatec.com

Cookies

S100 - S110

Reguladores PID S100Safety Module

CONATEC supplies the S100 and S110 modules adjusted to an alarm temperature value for a specific couple and according to the nameplate on the front of the device. 

The relay can only be reset if the alarm status disappears and the pushbutton on terminal 9 and 10 for resetting is pressed.

When the module has no power, or an alarm is triggered, the relay will have an alarm status.

General Characteristics

  • ON/OFF control with fixed hysteresis depending on models.
  • Valid for different thermocouples, factory set.

Electric

  • Power supply 230 Vac +/- 10%. Consumption 3 VA.
  • Potential-free relay outputs with cut-off capacity 5A/230Vac in a resistive load.
  • Protection against sensor break.

Mechanical

  • DIN rail.
  • Depth 60 mm including the connection terminals.
  • IP54 protection.
  • Operation between 0 and 60ºC and between 0 and 80% of RH.
  • Storage conditions between 10 and 60 ºC.
Attached archives:

We use our own and third party cookies, for the analysis of user navigation. If you continue browsing, we consider that you accept the use.
You can change the settings or get more information here.