C\ Gabiria nº 112-114-146 Pº Ventas
20305 Irún (Guipúzcoa) SPAIN
Tel.: +34 943 633 562 | Fax: +34 943 633 285
E-Mail: conatec@conatec.com
CONATECwww.conatec.com

CONATEC
C\ Gabiria nº 112-114-146
Pº Ventas 20305
Irún (Guipúzcoa) SPAIN
Tel.: +34 943 633 562
Fax: +34 943 633 285
E-Mail: conatec@conatec.com


Cookies

Controller 910

The controller 910 is based on a microprocessor and built into various modules,designed especially to govern drying chambers or defrosting chambers.
This allows indefinite automatic operation.

General Characteristics

  • Drying control using the control of the RH and of the chamber temperature.
  • Conservation control chamber.
  • Use of the external air.
  • Defrosting control: (not available in dryers)
    - Normal
    - By probes
  • All the drying controls include temperature control during the process.
  • Visualisation using maximum and minimum setpoint displays, as well as RH values and chamber temperature.
    - Signalling of activations.
  • Breakdown module.

Electric

  • Power supply 230 Vac +/- 10%. 50 / 60 Hz. Consumption 12 VA.
  • Maximum load for outputs mA with 500 ohm.
  • Maximum consumption for outputs 0/2-10 v with 10 mA.
  • Potential-free relay outputs with cut-off capacity 5A/230Vac in a resistive load.
  • Protection against sensor break.

Mechanical

  • Assembly in a closed metal cabinet measuring 380 x 300 mm.
  • Depth 200 mm including the connection terminals.
  • Front protection IP 54.
  • Rear protection IP 54.
  • Operation between 0 and 60ºC and between 0 and 80% without saturation.
  • Storage conditions between 10 and 60 ºC.

 

Attached archives:
Print  Print Send by Email  Send by Email

We use our own and third party cookies, for the analysis of user navigation. If you continue browsing, we consider that you accept the use.
You can change the settings or get more information here.