Regulator completely configurable by keyboard designed for all process types which require actions on contactors, servovalves with and without feedback and continuous outputs.
General Characteristics
PID control with self-tuning or ON-OFF with hysteresis.
Permanent display of the variable and its setpoint.
LED display for the control output action and alarm.
Configuration of the input type for thermocouples J, K, S and B. Pt100 probes, Ni200, ohms and analogue signals 0-20 mA, 4-20 mA, 0-10v or 2-10 v.
Control actions:
- Single-loop relay direct or inverse.
- Double loop relay direct or inverse.
- Double relay for servo-motor with and without feedback.
- Analogic 0/20 mA. 0-10v.
- Analogic 4/20 mA. 2-10v.
Absolute, relative or band configurable alarm.
Adjustment of the measurement offset.
Output 0/4-20 mA image of the input signal when not using analogue control.
Auxiliary power supply for two-wire transmitters.
Input for operating with remote setpoint.
Start – stop station.
Communication to a PC using RS-485 MODBUS RTU.
Electric
Power supply 230 Vac +/- 10%. Consumption 8 VA.
Maximum load for outputs mA with 500 ohm.
Maximum consumption for outputs 0/2-10 v with 10 mA.
Potential-free relay outputs with cut-off capacity 5A/230Vac in a resistive load.
Protection against sensor break.
Mechanical
Format 96x96. Panel cut-out 92x44 + 0.8 mm.
Depth 140 mm including the connection terminals.
Front protection IP54.
Rear protection IP20.
Operation between 0 and 60ºC and between 0 and 80% of RH.
Utilizamos cookies propias y de terceros, para realizar el análisis de la navegación de los usuarios. Si continúas navegando, consideramos que aceptas su uso. Puedes cambiar la configuración u obtener más información aqui.